INSTALLING THE OUTDOOR UNIT
Connecting the Cables to the Outdoor Unit
ENGLISH
One electric cable must be connected to the outdoor unit:
◆The assembly cable connecting the indoor unit to the outdoor unit
1Remove the terminal board cover on the side of the outdoor unit.
2Connect the assembly cable to terminals as shown in the figure.
➢Each wire is labelled with the corresponding terminal number.
3Connect the earth wires to the earth terminals.
➢Refer to the page 41 for further details on how to check that earthing is correct.
4Replace the terminal board cover, carefully tightening the screw.
Indoor unit A B 1 2 3 4
A B 1 2 3 4
A B 1 2 3 4
E
E
E
Outdoor unit A B 1 2 3 4 L1 L2
Earth
L1 L2 E terminal
Circuit Breaker(Main Power)
