Appendix
|
|
| Troubleshooting |
Before requesting service, please check the following. | |
|
|
PROBLEM | SOLUTION |
No operation can be performed with the | • Check the batteries in the remote control. They may need replacing. |
remote control. | • Operate the remote control at a distance of no more than 6.1m. |
| • Remove batteries and hold down one or more buttons for several minutes |
| to drain the microprocessor inside the remote control to reset it. Reinstall |
| batteries and try to operate the remote control again. |
Disc does not play. | • Ensure that the disc is installed with the label side facing up. |
| • Check the region number of the |
Disc Menu does not appear. | • Ensure that the disc has disc menus. |
|
|
The prohibition message appears on the | • This message appears when an invalid button is pressed. |
screen. | • The |
| • You’ve requested a title or chapter number or search time that is out of |
| range. |
Play mode differs from the Setup Menu | • Some of the functions selected in the Setup Menu may not work properly if |
selection. | the disc is not encoded with the corresponding function. |
The screen ratio cannot be changed. | • The screen aspect ratio is fixed on your |
| • This is not a problem with the product. |
No audio. | • Make sure you have selected the correct Digital Output in the Audio Options | |
| Menu. |
|
The screen is blocked | • Press the STOP ( | ) button (on the front panel) for more than 5 seconds |
| with no disc inside. All settings will revert to the factory settings. | |
•When the factory default settings are restored, all the stored user BD data is deleted.
If the HDMI output is set to a resolution your | • Press the STOP ( | ) button (on front panel) for more than | 5 seconds with |
TV cannot support (for example, 1080p), you | no disc inside. All settings will revert to the factory settings. |
| |
may not see a picture on your TV. | • When the factory default settings are restored, all the stored user BD data | ||
| is deleted. |
|
|
08 Appendix
English 59
