Setup

Before Starting (Initial Settings)

1.Turn on your TV after connecting the product. (When the product is connected to TV for the first time, the product will turn on automatically and display the Initial Settings screen.)

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English

Français

Deutsch

Español

Italiano

Nederlands

Svenska

>Move "Select

2.Press the ▲▼ buttons to select the desired language, then press the ENTER button.

3.Press the ENTER button to select Start.

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings"

Start

a Previous " Select

4.Press the ▲▼ buttons to select the desired TV aspect ratio, then press the ENTER button. (See page 31)

5.Press the ENTER button.

If you selected a Network Setting, go to pages 37~39 for more information about the Network settings. When done, go to Step 6.

6.Press the OK button.

The Home menu is displayed. For more information about the Home menu, please see page 29.

•Home Menu

Please activate Internet@TVinternet radio serviceYou Tube to enjoy a variety of Internet Services.

No Disc a Change Device

dView Devices "Enter

￿NOTE

▪When the product is connected to a TV for the first time, product will turn on automatically.

This is not malfunction.

▪The Home menu will not appear if you do not configure the initial settings except as noted below.

▪If you press the BLUE (D) button during the network setup, you can access the Home menu even if the network setup is not completed yet.

▪When you return to the Home menu, the full screen mode is cancelled automatically.

▪If you want to display the Initial Setting screen again to make changes, press the STOP ( ) button on the front panel of the product for more than 5 seconds with no disc inserted.

▪Use the HDMI cable to connect the product to an Anynet+(HDMI-CEC)-compliant Samsung TV.

If the TV uses a language supported by the product, that language will be set to a preferred language automatically.

For this to work, the Anynet+(HDMI-CEC) feature should be set to On in both the TV and the product.

▪If the product is left in the stop mode more than 5 minutes without being used, a screen saver appears on your TV. If the product is left in the screen saver mode for more than 25 minutes, the power automatically turns off.

28 English