audio setup

MIf you have selected a LPCM soundtrack on a disc, the output will automatically be set to PCM.

Be sure to select the correct Digital Output or you will hear no sound or a loud noise.

If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM.

Secondary and Effect audio will not be heard w ith regular DVDs.

Some Blu-ray Discs do not have Secondary and Effect audio.

This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV. It effects the optical and HDMI audio output when connected to a receiver.

When the player outputs HD audio bitstream(Dolby TrueHD or DTS-HD Master Audio) from the Optical jack to an HDMI 1.3 receiver, only 2 channel PCM audio will be heard.

If you play MPEG audio soundtracks, audio signal outputs PCM regardless of Digital Ouptut Selections(PCM or Bitstream).

PCM Down Sampling

On : Select this when the Amplifier connected to the player

is not 96KHz compatible. 96KHz signals will be down converted to 48KHz

No Disc

Off : Select this when the Amplifier connected to the player is 96KHz compatible. Signals will be output without any changes.

 

System Setup

 

 

 

Music

Language Setup

Digital Output

:

PCM

 

Audio Setup

PCM Down Sampling

:

OnOn

Setup

 

Display Setup

Dynamic Compression :

Off

 

 

On

HDMI Setup

Network Setup

Parental Setup

MEven when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the optical digital outputs.

HDMI

If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the unit may output PCM 2ch downmixed audio even though you set Bitstream(either Re-encode or Audiophile) on your setup menu.

If your TV is not compatible with PCM sampling rates over 48kHz, the unit may output 48kHz downsampled PCM audio even though you set "PCM Down Sampling" as "Off".

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

Off : You can enjoy the movie with the standard Dynamic

Range.

No Disc

On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

 

System Setup

Digital Output

:

PCM

Music

Language Setup

PCM Down Sampling

:

On

 

 

Audio Setup

Dynamic Compression :

On

Setup

 

 

 

 

Off

 

 

 

 

Display Setup

HDMI Setup

Network Setup

Parental Setup

36_ audio setup

Page 36
Image 36
Samsung BD-P1500/EDC, BD-P1500/XEF manual PCM Down Sampling, Dynamic Compression, Hdmi