remote control

SETTING THE REMOTE CONTROL

You can control certain functions of your TV with this remote control.

Control function buttons include : TV STANDBY/ON, TV PROG ,/., TV VOL +/–, TV MUTE, TV INPUT SEL. button.

To determine whether your television is compatible, follow the instructions below.

1.Switch your television on.

2.Point the remote control towards the television.

3.Press and hold the TV STANDBY/ON button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate number buttons. (see the next page for the code list).

If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.

MIf several codes are indicated for your television brand, try each one in turn until you find one that works.

If you replace the remote control's batteries, you must set the brand code again.

You can then control the television using the following buttons after pressing the TV button.

Button

Function

TV STANDBY/ON

Used to switch the television on and off.

TV INPUT SEL.

Used to select an external source.

TV VOL (+/–)

Used to adjust the volume of the television.

TV PROG (,/.)

Used to select the desired channel.

TV MUTE

Used to toggle the sound on and off.

MThe functions listed above will not necessarily work on all televisions. If you encounter problems, operate the television directly.

REGARDING THE BATTERY

If the remote does not operate properly:

Check the polarity +/– of the batteries (Dry-Cell)

Check if the batteries are drained.

Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

18_ remote control

Page 18
Image 18
Samsung BD-P1500/EDC, BD-P1500/XEF Setting the Remote Control, Regarding the Battery, Tv Standby/On, TV Input SEL, TV Mute