Samsung C6600 Wireless Network, Broadband service Wireless IP sharer PC, Wireless LAN Adapter

Connecting to the Network

Wireless Network

You can connect to the network with a Wireless IP sharer.

1.Connect the included wireless LAN adapter to the Wireless LAN jack on the back panel of the product.

-This unit is compatible with the supplied Wireless LAN Adapter.

-You can also use the wireless network by connecting the Wireless LAN Gender Adapter to the Wireless LAN Adapter, and then attaching the Wireless LAN Adapter to the Gender Adapter.

2.Set the network options. (See page 41)

02 Connections

Broadband service

Wireless IP sharer

PC

Networking with PC for AllShare function (See pages 63~64)

✎NOTE

LAN COMPONENT OUT

HDMII OUTOUT

IRELESS AUX IN VIDEO OUT

OR

Wireless LAN Adapter

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)

Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1)Authentication Mode : WEP, WPAPSK, WPA2PSK

2)Encryption Type : WEP, AES

For the AllShare function, a PC must be connected in the network as shown in the figure.

English 29