Setting a Standing Time

 

Multistage Cooking

The Hold Time can be used to set a standing time automatically (without microwave cooking). You do not need to watch the clock; the oven will beep when the standing time is over.

1.Press the Hold/Delay ( ) button.

Result: The follwing indication isdisplayed : (Hold/Delay mode)

2.Select the standing time by turning the dial knob.

3.Press Start ( 1min+) button.

Result: The oven beeps when the standing time is over.

Your microwave oven can be programmed to cook food in up to four

GB

stages (the convection mode can not be used in Multistage cooking). Example: You wish to defrost food and cook it without having to reset the oven after each stage. You can thus defrost and cook a 1.8 kg chicken in four stages:

•Defrosting

•Standing for 20 minutes

•Microwave cooking for 30 minutes

•Grill for 15 minutes

☛Defrosting and standing must be the first two stages. Combination and Grill can only be used once during the remaining two stages, However microwave can be used twice(at two different power levels).

1.Press the Auto Defrost ( ) button and set the weight by

turning the dial knob the appropriate number of times (1.8 kg in the example).

2.Press the Hold/Delay( ) button and set the standing

time by turning the dial knob the appropriate number of times (20 minutes in the example).

3.Press the POWER LEVEL( ) button .

Set the microwave power level by pressing the POWER

LEVEL( ) button to select the appropriate Power Level (450W in the example)

4.Set the cooking time by turning the dial knob (30 minutes in

the example).

5.Press the GRILL( ) button and set the cooking time by

turning the dial knob the appropriate number of times (15 minutes in the example).

6.Press Start ( 1min+) button.

Result: Cooking starts:

◆ When cooking has finished, the oven will beep and flash “0” four times. The oven will then beep one time per minute.

15