O P E R AT I O N

Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num- ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number.

1

Press CH ▲ or CH ▼ to tune to the channel that will be labeled.

2

Press MENU to display the menu.

Press CH ▼ twice to select “Channel”.

Press VOL +.

3

Press CH ▼ five times to select “Labeling”.

Press VOL + to begin labeling. The left-most field will be high- light.

(Each label has four fields. See top paragraph.)

4

Press the CH ▲ or CH ▼ but- ton to select a letter, anumber, “*”, or a blank. (Pressing CH ▲ results in this sequence:

A,B,...Z,*, blank,0,1,...9).

5

Press VOL+ to switch to the next field, which will be high- light. Select a second letter or digit using the CH ▲ and CH ▼ buttons, as above.

Repeat the process to select the last two digits.

Press MENU twice to set the label and clear the menus from the screen.

Note: You cannot select

“Labeling” in the A/V mode.

3.9 CHAPTER THREE: TV OPERATION

Page 30
Image 30
Samsung CL-29A5P, CL-29A5W, CL-29A6P, CL-29A6W, CL-29A7P, CL-29A7W, CL-29M6P, CL-29M6W, CL-34M9P Labeling the Channels