Y O U R N E W T V
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.
You can also use your remote control to operate your VCR and cable box. See page4.1 for details.
ŒPOWER
Turns the TV on and off.
´Number buttons
Press to select channels directly on the TV.
+100
Press to select channels over 100. For example, to select
channel 121, press “+100,” then press “2” and “1.”
ˇP.SIZE
Press to change to screen size. Your choises are Normal screen, Zoom screen or Wide screen.
¨R.SURF
Press the R.SURF button to auto- matically return to a preferred channel after a
ˆSLEEP
Press to select a preset time inter- val for automatic shutoff.
ØTURBO
Press to select the TURBO sound On or Off.
∏MUTE
Press to temporarily cut off the sound.
”CH▲ and CH▼
(Channel Up/Down)
Press CH▲ or CH▼ to change channels. (Also used to highlight selections on the
’P.STD
Adjust the TV picture by selecting one of the preset factory settings (or select your personal, cus- tomized picture settings).
˝TV
Press to use your remote control to operate your TV.
VCR
Press to use your remote control to operate your VCR.
CABLE
Press to use your remote control to operate a CABLE BOX.
SET
Use this button when you are set- ting up your remote control to operate your VCR or Cable box.
ÔPRE-CH
Tunes to the previous channel.
MTS (Multichannel Television Stereo)
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
ÒDISPLAY
Press to see the time, channel, etc.,
ÚVOL -, VOL +
Press increase or decrease the volume. (Also used to make selec- tions on the
ÆMENU
Displays the main
ıTV/VIDEO
Press to display all of the available video sources (i.e., Antenna/cable, VCR, DVD).
CHAPTER ONE: YOUR NEW TV 1.5
