Samsung CM1919/SW, CM1919/XEN manual Installation Instructions for Stacking, Replacement of Lamp

Models: CM1919/XEN CM1919/SW

1 140
Download 140 pages 11.72 Kb
Page 133
Image 133

INSTALLATION INSTRUCTIONS FOR STACKING

Important

1.Disconnect the power cord from the wall socket before attempting installation.

2.For stacking installation, you must use the “bracket plate” which is enclosed with this unit.

3.The maximum stacking height is two units.

Stacking the two units is limited to the following models. CAUTION : Be sure the oven cavity is empty.

Installation

1.Stack two units together.

2.Remove 6 screws as shown in the figure.

3.Place the Bracket-plate to join the two units.

4.Attach and tighten 6 screws as shown in the figure here.

5.Ensure the top oven is at a safe and workable height.

Screw

Bracket-Plate

REPLACEMENT OF LAMP

Important

1.Remove a screw securing the lamp cover.

You don’t need to remove outer panel to replace lamp.

2.Remove the lamp by rotating it clockwise.

3.Replace with a new lamp by rotating it counter-clockwise.

Lamp

Lamp Holder

Cover

Lamp

Outer(230V 25W)

Panel

13

ENGLISH

CM1519A_XEU_04029B-02_EN.indd 13

11/5/2015 9:05:41 AM

Page 133
Image 133
Samsung CM1919/SW Installation Instructions for Stacking, Replacement of Lamp, Remove a screw securing the lamp cover