Towels – To dry bath towels and similar items.

 

 

Wool (DV50F9A7E(G)*) – For machine washable and tumble dryable wool

 

 

only.

 

 

Sanitize – Sanitizes garments by infusing high temperature heat deep into

 

 

the fabric during the drying cycle. Use this course to keep your bedding and

 

 

curtains clean through sanitization.

 

 

Time Dry – Time Dry allows you to select the desired cycle time in minutes.

 

 

Turn the Cycle Selector dial to Time Dry, and then press the Adjust Time up

 

 

arrow to set the drying time. Press the arrow repeatedly to scroll through the

 

 

time settings.

 

 

Quick Dry - Provides a 30 minute drying cycle.

 

 

Air Fluff – The Air Fluff cycle tumbles the load at room temperature air.

 

 

Rack Dry (DV50F9A8E(G)*) – Dry special items as using to drying rack. (refer

 

 

to items of page 28 for detail).

 

 

Steam Sanitize (DV50F9A7E(G)*/(DV50F9A8E(G)*) – Sanitize garments by

 

 

infusing high temperature heat deep into the fabric and injecting steam

 

 

during the drying cycle. This course can make clothes soft and remove bad

 

 

odors after drying.

 

 

Refresh – Use to smooth out wrinkles and reduce odors in loads of one to

 

 

four items. In this cycle a small amount of water is sprayed into the dryer

 

 

drum after several minutes of tumbling with heat.

 

 

Wrinkle Away – Reduce wrinkles in dry clothes that have been left in a

 

 

closet for a while by providing advanced wrinkle release performance through

 

 

optimized steam care. Reduced wrinkles in up to 3 items at a time.

 

 

You can change the drying time using the Adjust Time button.

 

 

- You can increase or decrease the cycle time, but you cannot select a time

 

 

lower than the lowest pre-set automatic drying time (20 minutes).

 

 

 

 

 

The display window shows the estimated time remaining in the cycle after

 

 

you have pressed the Start/Pause button. The estimated time remaining may

 

 

fluctuates as the cycle progresses.

 

Digital Graphic

The Drying light will illuminate and remain lit until the cycle is complete.

2

When your dryer is in the cool-down phase, the Cooling light will illuminate. When

Display

 

your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will illuminate.

 

 

 

 

When the cycle is complete, “End” will appear in the display panel until you push

 

 

the Start/Pause button or the power button. If your dryer is paused during a

 

 

cycle, the indicator lights will blink until you press the Start/Pause button.

 

 

 

 

 

To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,

 

 

press the Dry Level button. An indicator light will illuminate next to the dryness

 

Dry Level

level you selected.

3

Press the button repeatedly to scroll through the settings. Larger or bulkier

Selection Button

 

loads may require the Very Dry or More Dry setting for complete dryness.

 

 

 

 

Damp Dry is designed to partially dry items. Use for items that lay flat or hang

 

 

to dry.

 

 

 

 

 

To select the temperature for the load, press the Temp button. An indicator

 

 

light will illuminate next to the temperature you selected. Press the button

 

 

repeatedly to scroll through the settings.

 

 

High – For sturdy cottons or those labeled Tumble Dry.

4

Temp Selection

Medium – For permanent press, synthetics, lightweight cottons, or items

Button

labeled Tumble Dry Medium.

 

Med Low – For heat lower than Medium. Use to dry synthetic or washable knit fabrics.

Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm. Extra Low – Provides the lowest heated drying temperature possible.

operating instructions, tips _25

02 operating instructions, tips

F900A DRY_DV50F_USER MANUAL_DC68-03170D_EN(邀请翻译成 法语+西班牙语).indd 25

2013-1-25 9:26:53

Page 25
Image 25
Samsung DV50F9A8GVW, DV50F9A8EVP, DV50F9A8EVW Digital Graphic, Display, Dry Level, Selection Button, Temp Selection