28_ operating instructions, tips
SIGnAL
The Sound O function can be selected during all courses.

Activating

If you want to activate the Sound O function, press the Mixed Load Bell button at the same time
for 3 seconds. The “Sound O” will be lit when this feature is activated.

Deactivating

If you want to deactivate the Sound O function, press the Mixed Load Bell button at the same
time for 3 seconds again.
When this function is selected, sound is turned o for all courses.
Even if the power is turned on and o repeatedly, the setting is retained.
RACk DRy

Installing the drying rack

1. Open the dryer door.
2. Place the Drying Rack inside the product, and then align the holes of the filter handle of the
Drying Rack to the front projections.
3. Place the rear legs in the two recessed areas of the dryer’s back wall, and then push down
the middle of the drying rack to fix it in place.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6. Press the RACK DRY ( DV50F9A6E(G)*/(DV50F9A7E(G)* ) button in Time Dry cycle, and then
select the time according to the moisture and weight of item.
Door
Drying Rack
Place the Drying Rack inside the dryer, align the holes of the filter handle of the Drying
Rack with the front projections, and then secure the back of the Drying Rack.
SUGGESTED ITEMS SUGGESTED TEMP. SETTINGS
Washable sweaters
(block to shape and lay flat on rack)
Extra Low ( Time Dry cycle)
Stued toys
(cotton or polyester fiberfilled)
Extra Low ( Time Dry cycle)
Stued toys
(foam or rubber-filled)
Air Flu
Foam rubber pillows Air Flu
Sneakers Air Flu
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
and create a fire hazard.
In case of Model is not supplied Drying Rack, you can purchase it through a service center.
operating instructions, tips
WARNING