Samsung DV50F9A8EVP, DV50F9A8GVW Installing your dryer, Unpacking your dryer, Basic requirments

installing your dryer

Unpacking your dryer

Unpack your dryer and Inspect it for shipping damage. Make sure you have received all of the items shown below. If your dryer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG (726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the dryer.

Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene, WARNING etc.) well out of childrens’ reach

Do not move the product while holding the front part of the top cover of the dryer. CAUTION - This may cause the cover to be separated and result in injury.

Control panel

[ BACK ]

Top Cover

	Door
Filter	Duct Exhaust
Frame Front

Tools needed

01 installing your dryer

Pliers Cutting knife Pipe wrench (gas only) Nut drivers

Level Phillips Screwdriver Duct tape Wrench

Parts supplied

Rubber washer “Y”- Connector Hose water Short inlet hose

Basic requirments

Make sure you have everything necessary for proper installation

•A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.

•A POWER CORD for electric dryers (except in Canada).

•GAS LINES (if installing a gas dryer). The gas lines must meet national and local codes.

• EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.

installing your dryer _9

F900A DRY_DV50F_USER MANUAL_DC68-03170D_EN（邀请翻译成 法语+西班牙语）.indd 9

2013-1-25 9:26:47