Samsung DV50F9A8EVW, DV50F9A8EVP, DV50F9A8GVW Time Selection, Select Cycle, Option, Start/Pause

operating instructions, tips

		When using Manual Dry cycles, you can adjust the drying time by pressing the
	Time Selection	time selection button.
5		During the Sensory Dry cycle, the time light indicator is off because exact
	Button
		drying times are determined by fluctuating humidity levels.
		Therefore, the actual drying time may differ from the displayed time.
		Anti Static – To reduce statics by clothing friction and spray steam at the later
		period of drying cycle.
		It is only available with: Normal, Heavy Duty, Perm Press, Delicates (Dry level
		of every course exceeds Normal) and Time dry course.
		In order to reduce statics, the drum can be paused during operation.
		Rack Dry – Rack Dry is available at Time Dry cycle. Temperature will be set
		only to Extra Low.
		Small Load CareTM (DV50F9A8E(G)*) – To control operation rate for drying a
		small loads at Sensor Dry course.
		It is only available with: Normal, Heavy Duty, Perm-Press and Delicates course.
		It can’t be selected/cancelled when the drying course is running.
		In order to improve drying effect and control operation rate, the drum can be
		paused during operation.
		Drum Light – Lights the dryer drum while the dryer is running. (See page 26
		for detail.)
		My Cycle – Choose your favorite cycle including, temp, dry level.
	Select Cycle	Adjust Time – You can add or subtract time from the automatically set times
6		in the Wrinkle Release cycle and the Manual Dry cycles (Time Dry, Quick Dry,
	Option
		Rack Dry or Air Fluff cycles.)
		To add or subtract time from the cycle, press the Adjust Time arrow pad up or
		down until the desired time is displayed.
		Wrinkle Prevent - Wrinkle Prevent provides approximately 180 minutes
		of intermittent tumbling in unheated air at the end of the cycle to reduce
		wrinkling. Press the Wrinkle Prevent button to activate this feature.
		The indicator light above the pad will illuminate when you select Wrinkle Prevent.
		The load is dry and you can remove it at any time during the Wrinkle Prevent cycle.
		Mixed Load Bell - The mixed load bell that notifies you when the average
		dry level in a load is damp dry (80 % dried). This lets you take garments that
		you don’t want fully dried or that dry quickly out of the dryer early while letting
		others continue to dry. You can select this function in all Sensor Dry cycles
		except Sanitize. The dry level selections are limited to Normal Dry, More Dry,
		and Very Dry.
		* Some options may not be selected simultaneously.
7	Start/Pause	Press to pause and restart programs.
	selection button

Press once to turn your dryer on, Press again to turn it off. If you turn

8Power button your dryer on and do not touch any buttons for 10 minutes, the power automatically turns off.

If you insert laundry into your dryer while it is extremely tangled immediately after your washer has finished a wash or spin cycle, it may degrade the drying efficiency or cause the door to open. We recommend that you disentangle your laundry appropriately before inserting it.

Each indicator on the graphic display means: Steam

Child Lock

Filter Check

Vent Sensor

26_ operating instructions, tips

F900A DRY_DV50F_USER MANUAL_DC68-03170D_EN（邀请翻译成 法语+西班牙语）.indd 26 2013-1-25 9:26:53