Setting Up the
Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the unit using a Samsung TV remote control, by connecting the DVD 1080PK to a SAMSUNG TV using a HDMI Cable. (see page
Select On when you connecting the
1.With the unit in Stop mode, press the MENU button.
2.Press the / buttons to select Setup, then press the or ENTER button.
Language Setup
Audio Setup
Display Setup
Parental Setup :
DivX(R) Registration
Enter 
Return 
Menu
3.Press the / buttons to select
Language Setup
Audio Setup
Display Setup
Parental Setup :
DivX(R) Registration
Enter 
Return 
Menu
4.Set the
Language Setup
Audio Setup
Display Setup
Parental Setup :
DivX(R) Registration
Off
Enter 
Return 
Menu
5.Set the Anynet+ function at your TV. (See the TV instruction manual for more information.).
•When you press Anynet+ button on the TV remote control, the below OSD will appear.
DVDP
|
|
|
|
|
V | iew TV |
|
| ® |
Select Device | ® | |||
Record |
| ® | ||
Menu on Device | ® | |||
Device Operation | ® | |||
Receiver | : Off | ® | ||
Setup |
| ® | ||
Move | ENTER |
| ||
Exit |
|
| ||
TV Menu
Note
To make the Setup menu disappear, press the MENU button.
•You can operate the DVD Player by using TV
remote control. (TV buttons that can be used to con
trol the DVD Player : 
, 
,
, 
,
,, 
,and 
buttons, 
buttons.).
-Select Device : Use this option to select device.
-Menu on Device : Same as MENU button on the DVD Player remote control.
-Device Operation : Same as INFO button on the DVD Player remote control.
Note
•By pressing the PLAY button of the unit while watch- ing TV, the TV screen will change to the play screen.
•If you play a DVD when the TV power is off, the TV will power On.
•If you turn the TV off , the DVD Player will power off automatically.
•If you change the HDMI to other sources (Composite,Component,... etc) in TV while play ing the DVD disc, the DVD Player will stop play ing.
32
