❷MPEG-2 Digital Out
-PCM : Converts to PCM(2CH) audio.
-Bitstream : Converts to
Digital Audio Output.
❸Dynamic Compression
-On : To select dynamic compression.
-Off : To select the standard range.
❹PCM Down Sampling
-On : Select this when the Amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
-Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Note :
-Even when PCM Down sampling is Off
•Some discs will only output down sampled audio through the digital outputs.
➎Output Channel
-2CH : Select this when using 2 channel connection only.
-5.1CH : Select this when using 5.1channel connection.
Note :
- To make speaker setup menu appear, select output channel to 5.1CH.
•If you select the 5.1 Channel, connect the RCA cable to the C&LFE connections for analog audio.
•If you select the 2 Channel option, connect the cable to the FR&FL connections.
-There is no analog audio output when you play
a DTS sound disc.
-To make the Setup menu disappear, press the MENU button.
❻Speaker Setup
HDMI
- If your TV is not compatible with compressed multi- channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.
-If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down sam- pling to On.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Surround Sound Speaker Setup
1. With the unit in Stop mode, press the MENU button.
2. Press the / buttons to select Setup, then press the or ENTER button.
3. Press the | / buttons to select Audio Setup, then press | |||
the | or ENTER button. |
|
| |
4. Press the | / buttons to select Speaker Setup, then | |||
press the | or ENTER button. |
|
| |
5. Press the | / / / buttons to select the desired item, | |||
then press the ENTER button to set the speaker. |
| |||
|
|
| AUDIO SETUP | |
|
| Digital Out |
| : PCM |
|
| : PCM | ||
|
| Dynamic Compression : On | ||
|
| PCM Down Sampling | : On | |
|
| Output Channel | : 5.1Ch | |
|
| Speaker Setup |
| |
|
| Enter | Return | Menu |
|
|
| SPEAKER SETUP | |
|
| Small | Small | Small |
|
| On | ||
|
|
|
| |
|
| Test | User |
|
|
|
|
| |
|
| Small |
| Small |
|
| Enter | Return | Menu |
Note
To make the setup menu disappear, press the MENU button.
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small).
Select the size of the speakers to be connected.
❶Front (FL, FR)
-Large: Normally select this.
-Small: When the sound distorts or the suround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirec tion circuitry and outputs the bass frequencies
of the speaker from the subwoofer.
❷Center
-None: If you do not connect a center speaker, select this.
-Large: Normally select this.
-Small: When the sound distorts, select this. This activates the Dolby Digital bass redirec- tion circuitry and outputs the bass frequencies of the center speaker from other speakers.
❸Surround (SL, SR)
-None: If you do not connect a center speaker, select this.
-Large (Rear/Side): Normally select either of these according to the rear speaker’s position.
-Small (Rear/Side): When the sound ditorts or the surround sound effects are dificult to hear, select either of these according to the rear speaker’s position.
This activates the Dolby Digital bass rediretion circuitry and outputs the bass frequencies of the rear speaker from other speakers.
28
