Xerox Network Laser Printers manual Quick Steps For Connection & Setup, Connecting to Your Network

Quick Steps For Connection & Setup

Quick Steps For Connection &

Setup

Quick Steps for printer connection and setup, for use by the experienced System Administrator, are provided within this section.

Quick Steps common to virtually all platforms include:

1.Install cabling to link the Network Interface to your network.

2.Print a Configuration Sheet to determine the printer’s current Network settings. See the section “Print the Configuration Sheet” (page 2-21).

3.If you are connecting this printer using TCP/IP protocol, refer to the section “Set An IP Address” (page 2-6).

4.Go to the appropriate chapter(s) within this Technical Information Guide (TIG) covering your workstation Operating System and follow the setup instructions provided.

5.If your job doesn’t print correctly, refer to the Troubleshooting section within the applicable Operating System chapter of this TIG for problem-solving information.

Chapter 2: Connecting to Your Network ❖ 2-5