Set An IP Address
Dynamic Addressing (RARP/BOOTP)
The TCP/IP address is assigned automatically by the Server. Follow the steps below:
1 Power on your DocuPrint network printer and allow time for an IP address to be assigned by the RARP/BOOTP server (this time may vary depending on network traffic).
If you are using the Xerox CentreDirect External Print Server (External Ethernet Adapter) to connect your printer to the network, make sure the Adapter is powered on in addition to the printer.
When the CentreDirect External Print Server acquires an IP Address, the SYS LED blinks once per second. If the IP Address is not set the SYSLED blinks 5 times per second.
2
3
4
Perform the steps contained in the section “Print the
Configuration Sheet” (page 2-21).
Obtain the hardware and TCP/IP addresses from the Configuration Sheet.
Update the RARP/BOOTP server’s /etc/ethers, and the / etc/hosts files with a host name, TCP/IP and hardware addresses. Consult your UNIX documentation for more RARP/BOOTP server configuration details.
Chapter 2: Connecting to Your Network ❖