Telnet and NBMON command mode options
Introduction | |
Monitor Menu: | |
Configure Console: | |
Display summary configuration parameters: | |
Display/set ethernet options: | |
Flash firmware load enable/disable: | |
Display/set IP address: | |
Limit monitor network access by password: | |
Network protocols menu: | |
AppleTalk options: | |
HP DLC options: | |
Microsoft Windows print services options: | |
Netware options: | |
SNMP options: | |
TCP/IP options: | |
Display/set parallel port parms and status: | |
Reset nvram to factory defaults: | |
Print ASCII test page: | |
Print Postscript test page: |
Appendix A: Telnet and NBMON command mode options ❖
