Xerox Network Laser Printers manual Display/set parallel port parms and status

Display/set parallel port parms and status:

			Monitor Menu:
Command [?,C,D,E,F,H,I,L,N,P,Q,R,S,Z,*,+] --> p
Parallel port 1 status: (NOT_CONNECTED)
Current Parallel port config:
mode	setup/strobe (us)	console/test page
bidirection
Standard	2.7	PostScript	Disabled

Parallel port mode:

1(Standard)

2(Fifo-ACK)

3(Fifo-BUSY)

<enter> (don't change/continue)

Select data-setup/strobe-width (in microsec)

1(2.7)

2(5.4)

3(8.1)

4(10.8)

<enter> (don't change/continue) Select parallel console/test page type

1(PostScript)

2(Ascii text)

<enter> (don't change/continue) Enable Bidirection Interface ?

1(No)

2(Yes)

<enter> (don't change/continue)
New Parallel port config:
mode	setup/strobe (us)	console/test page
bidirection
Standard	2.7	PostScript	Disabled

Appendix A: Telnet and NBMON command mode options ❖ A-11