NetWare Troubleshooting
5
6
7
Review the Connectivity Settings and check for these things:
•NetWare is enabled.
•Frame Type matches the frame type of the desired fileserver.
To determine your NetWare IPX frame type, type config at the Novell console screen. On large networks, using multiple IPX frame types, it is CRITICAL that the frame type be set correctly.
•PDL is set to your desired PDL (PostScript or PCL 5e) or to Auto.
•Primary Server (for NetWare 3.1X only) is set to the name of the server which serves the print queue you have assigned to the DocuPrint printer.
•NDS Tree (for NetWare 4.1X NDS and later) is set for the correct NDS tree name.
•NDS Context (for NetWare 4.1X NDS and later) is set for the correct NDS Context.
•Print Server (PServer) Name is set for the name selected for this DocuPrint printer to act as a print server.
•Novell Mode is correctly set.
If any changes are made, reset the or if connected to the network with an External Ethernet Adapter, power cycle the Adapter. Once the printer has been reset, allow the printer approximately two minutes to go through self test and then log into the network server.
Print out another Configuration Sheet to verify the items you modified were set and retained.
