Xerox Network Laser Printers manual Click the Browse button and select the directory

	Windows NT 4.0 Network
14	Click the Browse button and select the directory
	containing the Windows NT drivers
	(<CD Drive>:\instal\winnt40) then click Open.
15	Select the *.INF file then click OK.
16	The Wizard will return you to the previous dialog. Verify
	the path and file name are correct and click OK.
17	At the next dialog, enter a name for the printer and select
	whether you want that printer to be the default then click
	Next>.
18	If the printer will not be shared, click Next>. To share the
	printer, enter a Share Name, check the share checkbox,
	then click Next>.
19	At the next dialog it is recommended that you print a test
	page. Click Finish.
20	Wait for the Test Print to print. A new dialog will ask for
	confirmation of the test print, click Yes.
21	Send a print job to the printer.
22	Check the print job for print quality. If print quality
	problems exist, use the print quality section of the
	DocuPrint System Administrator Guide to correct the
	problem.
23	If your print job did not print, see the section “Windows
	Troubleshooting” (page 4-20) to correct the problem.

Chapter 4: Windows / Peer-to-Peer Network Setup ❖ 4-19