Setting DEFAULT GATEWAY at the Control Panel
Setting DEFAULT GATEWAY at the
Control Panel
If you are using the Xerox CentreDirect External Print Server (External Ethernet Adapter) to connect your printer to the network, you cannot use the control panel to set a default gateway. Use the telnet procedure that is described in the section for Windows and Unix Operating Systems.
1 Press Menu Up or Menu Down until you see:
Me nus
Ethernet Menu
2 Press Item Up or Item Down until you see:
3
4
5
6
Ethernet Menu
Default Gateway
Press Value Up or Value Down. You will see:
Default Gateway=
xx x.xxx. xxx.xxx
Press Value Up or Value Down to change the value of the character above the cursor. The value is incremented or decremented by 1 each time the key is pressed. Holding down Value Up or Value Down causes continuous scrolling through the values.
To change other characters in the Default Gateway address, press Item Up or Item Down to scroll right or left respectively through the character string, then press Value Up or Value Down to change the value of the character above the cursor (as in Step 4).
When you have completed setting the Default Gateway address, press Enter. You will see:
Ethernet Menu Default Gateway
7 Press On Line. You will see:
Ready
Chapter 2: Connecting to Your Network ❖
