Quick Check For | 1 |
CentreDirect External
Print Server (External
Ethernet Adapter)
(NetBEUI)
2
3
4
5
Make sure that the NetBEUI workgroup name set on the CentreDirect External Print Server is a valid workgroup on your network. The CentreDirect will not appear on the network if the workgroup name does not match a valid workgroup. Print a Configuration Sheet to verify that the workgroup name is correctly set.
Print and Configurtion Sheet and verify that the "Microsoft Windows Print Services" are enabled on the CentreDirect.
Verify that the Windows workstation has the NetBEUI protocol correctly loaded and bound to the ethernet adapter in the workstation.
If there are multiple workgroups on your network, make sure that you look in the correct workgroup for the CentreDirect. In some cases, this may different from the workgroup of your workstation. The CentreDirect should appear in the workgroup listed on the Configuration Sheet.
Verify that your workstation is on the same ethernet segment as the CentreDirect. The NetBEUI protocol is not routable.
