Print the Configuration Sheet
To Print the
Configuration Sheet
from the Xerox
CentreDirect External
Print Server (External
Ethernet Adapter)
1 | Set the DIP switches that are located on the rear of the |
| CentreDirect External Print Server (External Ethernet |
| Adapter) to D1 in the up position and D2 in the down |
| position. |
2 | Unplug the power cord from the Adapter. |
3 | Wait 5 seconds and plug the power cord into the Adapter. |
4 | The Adapter will print a Configuration Sheet after |
| approximately 15 seconds |
Male sure that the Xerox CentreDirect External Print Server (External Ethernet Adapter) is attached to the printer. If a Configuration Sheet does not print, Make sure that the DIP switches are in the proper position. Also, power the printer and the Ethernet Adapter off and on. Sometimes the devices may become unsynchronized.
