Resetting the Printer
To Reset your CentreDirect External Print Server (External Ethernet Adapter) to factory defaults
1 | Set the DIP switches that are located on the rear of the |
| CentreDirect External Print Server (External Ethernet |
| Adapter) to D1 in the down position and D2 in the down |
| position. |
2 | Unplug the power cord from the CentreDirect. |
3 | Wait 5 seconds and plug the power cord into the |
| CentreDirect. |
4 | Wait 30 seconds for the CentreDirect to start up (reboot). |
5 | Quickly toggle DIP Switch D1 up and down at least 10 |
| times. |
6 | Return the DIP switches to normal operation settings (i.e. |
| D1 up / D2 up or D1 up / D2 down). See “DIP Switch |
| settings for your CentreDirect External Print |
| Server (External Ethernet Adapter)” on page 25. |
7 | Unplug the power cord from the CentreDirect. |
8 | Wait 5 seconds and plug the power cord into the |
| CentreDirect. |