Macintosh Driver Installation
Selecting the Printer from the Chooser
Before continuing, make sure that the software included with your customer documentation set has been loaded into each Macintosh computer that will be sending jobs to the DocuPrint printer.
Before you send a print job to the DocuPrint printer, make sure that it is selected as the current printer in the Chooser.
1 | At the printer, print a configuration sheet and note the |
| printer address. Refer to the section “Print the |
| Configuration Sheet” (page |
2 | At your computer, select the APPLE in the upper left |
| corner of the Desktop. |
3 | Select the Chooser entry in the menu. |
4 | Make sure that AppleTalk is active. |
5 | In the left window of the Chooser, click on the Adobe PS |
| icon to select it. You may have to use the scroll bars at the |
| right side of this box to locate the icon. |
| Your network may be divided into AppleTalk |
| Zones. You can tell if there are zones by the |
| appearance of the CHOOSER window. When the |
| CHOOSER program detects multiple zones, the left |
| window will be reduced in size. The lower half of |
| the CHOOSER window will be a zone list. Identify, |
| then select the zone in which the DocuPrint |
| printer is located. |
6 | When you select a zone, printer names appear in a box to |
| the right. |
7 | Select the printer address from the window to the right. |
8 | Click Setup... |
| If you do not use the DocuPrint driver, you may |
not be able to take advantage of all of the printer’s features.
