Samsung DVD-HD950 Connecting to your TV using Component video cables, Connection to a TV S-Video

C O N N E C T I O N S

Connection to a TV (S-Video)

-Connecting to your TV using an S-Video cable.

-You will enjoy high quality video. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode.

(Audio signals are delivered through the audio output.)

C O N N E C T I O N S

Connection to a TV (Interlace)

-	Connecting to your TV using Component video cables.
-	You will enjoy high quality and accurate color reproduction images. Component video separates
	the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean
	images. (Audio signals are delivered through the audio output.)

1

Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of your TV.

1	Connections
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

3

REDWHITE

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

3

RED BLUE GREEN

Press the input selector on your TV remote control until the S- Video signal from the DVD player appears on your TV screen.

Audio Cable

S-Video Cable (not included)

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV

RED	WHITE
Audio Cable

RED WHITE

screen.

		Component cable
		(not included)
RED	WHITE	RED BLUE GREEN

4

Set the Video Output to COMPOSITE/S-VIDEOin the Display

Setup menu. (See pages 64 to 66)

You can use the VIDEO SEL. button to change the Video

Output mode. (See page 12)

Note

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 20 to 22)

-The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

4

Set the Video Output to COMPONENT(I-SCAN)in the Display

Setup menu. (See pages 64 to 66)

You can also use the VIDEO SEL. button to change the Video

Output mode. (See page 13)

Note

-If Video output is incorrectly set to COMPOSITE/S-VIDEO with the Component cables connected, the screen will turn red.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 20 to 22)

-The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and location of the terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

ENG-14 ENG-15