Samsung DVD-HD950 Playing a Disc, Connection to a 5.1CH Analog Amplifier, Before Play, Playback

C O N N E C T I O N S

Connection to a 5.1CH Analog Amplifier

1

If using audio cables for 5.1 CH Analog Amplifier (not included) connect the 5.1CH ANALOG AUDIO OUT terminals on the rear of the DVD player to the 5.1CH ANALOG AUDIO IN terminals of the 5.1CH Analog Amplifier.

Chapter 3

B A S I C F U N C T I O N S

Playing a Disc

Before Play

-Turn on your TV and set it to the correct Video Input using your TV's remote control.

-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

2

Using the video signal cable(s), connect the VIDEO, S-VIDEO,COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO,COMPONENT, HDMI or DVI IN terminals of your TV as described on pages 13 to 17.

3

Turn on the DVD player, TV, and Amplifier.

GREEN WHITE BLACK

GREEN WHITE BLACK

After plugging in the player, the first time you press the DVD POWER button, this screen appears: If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.

Once you select a menu language, you can change it by pressing the button on the front panel of the unit for more than 5 seconds with no disc in the unit.

Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language.

Press	1	for English
Touche	2	pour Français
Drücken Sie	3	für Deutsch
Pulsar	4	para Español
Premere	5	per Italiano
Druk op	6	voor Nederlands

Basic Functions

5.1ch Analog

Amplifier

Playback

1

Press the OPEN/CLOSE ( ) button.

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

The STANDBY indicator light turns off and the tray opens.

Note

-Please turn the volume down when you turn on the Amplifier.

Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 61)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

2

Place a disc gently into the tray with the disc’s label facing up.

3

Press the PLAY/PAUSE ( ) button or OPEN/CLOSE ( ) button to close the disc tray.

▼ RESUME function

When you stop disc play, the player remembers where you stopped, so when you press PLAY/PAUSE ( ) button again, it will pick up where you left off. (unless the disc is removed or the player is unplugged, or if you press the STOP ( ) button twice.)

ENG-22 ENG-23