CO N N E C T I O N S

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1

If using an optical cable (not included), connect the

DIGITAL

AUDIO OUT (OPTICAL) terminal on the rear of the DVD player

to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.

If using a coaxial cable (not included), connect the

DIGITAL

AUDIO OUT (COAXIAL) terminal on the rear of the DVD player

to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

2

Using the video signal cable(s), connect theVIDEO, S-VIDEOor COMPONENT OUT terminals on the rear of the DVD player

to the VIDEO, S-VIDEO or COMPONENT IN terminal of your TV as described on pages 11 to 14.

3

Turn on the DVD player, TV, and Amplifier.

Optical Cable (not included)

or

Coaxial Cable (not included)

Dolby digital or

DTS amp

4

Press the input select button of the Amplifier to select

external

input in order to hear sound from the DVD player.

 

Refer to your Amplifier's user manual to set the Amplifier's

 

audio input.

 

Note

-When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-16

Page 76
Image 76
Samsung DVD-P350K/XSS, DVD-P350K/AFR, DVD-P350K/AND, DVD-P350K/XSG, DVD-P350K/UMG manual Audio input, Digital