SE T U P

Setup

Rear Panel

12

1

3

4

5

1.DIGITAL AUDIO OUT JACKS

-Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

2.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component

Video in jacks. These jacks provide P

R , PB and Y video.

-If Component(P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work.

-If Component(I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work.

3.AUDIO OUT JACKS Connect to the Audio input jacks of your television or audio/video receiver.

4.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

-The Video Output in Setup Menu must be set to

COMPOSITE/S-VIDEO.

5.S-VIDEO OUT JACK

-Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality.

-The Video Output in Setup Menu must be set to

COMPOSITE/S-VIDEO.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.

-See pages 52 ~ 53 to get more information on how to use the setup menu.

ENG-9

Page 69
Image 69
Samsung DVD-P350K/UMG, DVD-P350K/AFR, DVD-P350K/XSS manual Rear Panel, Use these jacks if you have a TV with Component