ENG-12
CONNECTIONS
Connection to a TV (S-Video)
- Connecting to your TV using an S-Video cable.- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)and color(C) signals to present clearer images than regular video input mode. (Audio signals aredelivered through the audio output.)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
1
Using an S-Video cable (not included), connect the S-VIDEO
OUTterminal on the rear of the DVD player to the
S-VIDEO INterminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUTterminals on the rear of the DVD player to the AUDIO (red
and white) INterminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
S-Video signal from the DVD player appears on your TV
screen.
4
Set the Video Output to COMPOSITE/S-VIDEOin the Display
Setup menu. (See pages 53 to 54)
RED WHITE
RED WHITE
Audio Cable S-Video Cable
(not included)
00632G-P355-XEL_1 2/17/05 7:59 PM Page 12