Copying from a
Camcorder
You may control the Camcorder using the IEEE1394 (DV) interface.
Before you start
Check that the disc has enough available space for the recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
5 Select the Play icon on the upper part of the screen to playback the camcorder and find the starting position to copy.
You can press the PLAY button of the remote control to play the camcorder.
6 To start recording, use the œ √ to select
( ● ) icon in the top side of the screen, then press the OK button.
You can press the REC button of the remote control to start recording. To display playback related icons on the screen, press any direction button on the remote control.
To stop recording
Press the STOP ( 
) button to stop or finish a recording in progress.
●When using
■ You can not change the recording mode and
If an unused
NOTE
input source while recording.
format or not will be asked first. (See page 41.) If an unused
3 Press the REC MODE button repeatedly, (or Press the REC MODE button, then press the …† button) to select the recording speed(quality).
➞SP ➞ LP ➞ EP ➞ XP
Record Mode SP (02:12)
4 Press the INPUT button to select DV.
If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.
DV
The DV device is connected.
MOVE | OK | RETURN |
■Recording will stop automatically if there is no free space left for recording.
■Up to 99 titles can be recorded onto a disc.
■Recording will stop automatically if a copy protected image is selected.
■
■Do not use
ecordingR
English