Samsung DVD-R125/XEF, DVD-R125P Setting up Video Output Options, Audio Options, MENU, Setup, Video, DTS, Off, MENU, RETURN, Digital Output, Dynamic Compression

5 Press the …† buttons to select the desired item, then press the OK or √ button.

■Press the RETURN or œ button to return to the previous menu.

NOTE

Press the MENU button to exit the menu.

Setting up Video Output Options

You can enjoy high quality image through RGB or Component video connections.

System Setup

Audio OptionsDigital Output

1.PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo.

2.Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

		■ Digital output setting is equally applied to
		both Dolby Digital and MPEG-2 audio.

	NOTE
	NOTE	LPCM sound track is always outputted as
		LPCM sound track is always outputted as
		PCM. It has no relation with Digital Output
		setting.

■Be sure to select the correct Digital Output or you will hear no sound or loud noise.

DTS

1. Off : Doesn’t output DTS signal.

Select this when your AV receiver or AV amplifier does not have DTS decoder.

2.On : Outputs DTS Bitstream via digital output when you play DTS track.

Select this only when your AV receiver (or AV amplifier) have DTS decoder.

■When DTS soundtrack is played, sound

does not output from AV Audio Output.

NOTE

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

1.Off : You can enjoy the movie with the standard Dynamic Range.

2.On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

No Disc		Timer Record
Programme	ShowView		√
Setup	Timer Record		√
Setup
	ShowView Extended : Off		√
MOVE	OK	RETURN	EXIT

2 Press the …† buttons to select Setup, then press the OK or √ button.

No Disc			Setup
Programme	System		√
	System		√
Setup	Clock Set		√
Setup	Language
	Language		√
	Audio		√
	Video		√
	Parental Control		√
	Install		√
MOVE	OK	RETURN	EXIT

3 Press the …† buttons to select Video, then press the OK or √ button.

Video setup menu will be displayed.

No Disc				Video
Programme	TV Aspect		: 4:3 Letter Box √
Setup	3D Noise Reduction		: Off	√
	HDMI/DVI Resolution		: 576p	√
	Video Output		: Component √
MOVE	OK	RETURN		EXIT

34- English