Samsung DVD-R145 instruction manual Video, Timer Recording, Sound, Timer lamp flickers

Video

The disc revolves, but no image or bad quality images are displayed.

Timer Recording

Timer lamp flickers.

Checkpoint 1

Checkpoint 2

Checkpoint 3

Check whether there is damage to or any foreign material on your disc.

Some low quality discs may not play properly.

If scenes change from dark to bright suddenly, the screen may shake vertically temporarily, but this is not a fault.

Checkpoint 1

Checkpoint 2

Check if there is enough space in the disc for recording.

Check whether the current disc is recordable or not.

Make sure to check before the start time of recording.

Timer recording does not work properly.

Sound

No sound.

Checkpoint 1 Are you watching a program in scan mode?

Checkpoint 1

Checkpoint 2

Re-check the recording time and the end time settings again.

Recording will be cancelled, if the power is disconnected due to a power failure or other similar reason, while recording.

If you are playing a program at a speed other than normal and fast1 speed, the sound will not be heard.

HDMI

Checkpoint 2

Checkpoint 3

Check the connections and settings.

Check whether the disc is damaged. Clean the disc, if necessary.

No HDMI output.

Checkpoint 4

Check whether the disc is inserted correctly with the label facing up.

Checkpoint 1

Checkpoint 2

Check the Video output is HDMI enabled.

Check the connection between the TV and the HDMI jack of the DVD

No audio output.

Checkpoint 3

Recorder.

See if your TV supports this 480p/720p/1080i DVD Recorder.

Checkpoint 1 Check whether you have selected the correct digital output options in the Audio Output Options menu.

(See page 35~36.)

Abnormal HDMI output screen.		Additional Information
Checkpoint 1	If snow noise appears on the screen,
	it means that TV does not support
	HDCP (High-bandwidth Digital
	Content Protection).

English - 101