Step 4 : Connecting HDMI/DVI to a TV

Setting Up

Connecting &

If your TV has a HDMI/DVI input, connect HDMI/DVI cable to a TV. You will enjoy the best quality images and sounds.

Connecting to a TV with HDMI Jack

Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of your TV.

Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV screen.

HDMIOUT

Caution

To watch through the HDMI output, set the digital audio output to PCM.(See page 35~36)

Depending on the HDMI device(TV/HDMI Receiver) you use, audio may not be supported. If TV does not support Dolby digital/DTS, Audio output is not available when you set Digital output as Bitstream or select DTS On in Audio setup menu. In this case, set the digital audio ouput to PCM or DTS Off.

24 - English

Page 24
Image 24
Samsung DVD-R145 instruction manual Connecting HDMI/DVI to a TV, Connecting to a TV with Hdmi Jack