Samsung DVD-R145 instruction manual Input source while recording

Copying from a Camcorder

You may control a Digital Camcorder using the IEEE1394 (DV) interface.

Before you start

Check that the disc has enough available space for the recording. Adjust the record mode. See pages 27~28 to see how to connect the camcorder to your DVD recorder.

Press the OPEN/CLOSE button, and place a

1 recordable disc on the disc tray.

2	Press the OPEN/CLOSE button to close the disc tray.
	Wait until “LOAD” disappears from the front panel display.
	If an unused DVD-RW disc is inserted, whether to
	initialize or not will be asked first. (See page 49)
3	Press the REC MODE button repeatedly (or press
	the REC MODE button and then press the …†

button) to select the recording speed(quality).

➞SP ➞ LP ➞ EP ➞ XP

Record Mode XP (01:11)

4	Press the INPUT SEL. button to select DV.
	If the input is set to DV, a playback/record menu that

enables Digital camcorder control appears on the top of the screen.

DV
The DV device is connected
MOVE	SELECT	RETURN

5 Select the PLAY ( √ ) icon on the upper part of the screen to playback the camcorder and find the starting position to copy.

6 To start recording, select REC( ● ) icon in the top side of the screen using the œ √ buttons, then press the ENTER button.

To stop recording

Press the STOP ( ) button to stop or finish recording in progress.

•When using DVD-RAM/DVD±RW/ DVD±R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed.

	■	You can not change the record mode and
		input source while recording.
NOTE
	■	Recording will stop automatically if there is
		no free space left for recording.
	■	Up to 99 titles can be recorded onto a
		DVD-RAM/-RW/-R disc, and up to 48 titles
		onto a DVD+RW/+R disc.
	■	DVD-RAM/DVD±RW/ DVD+R discs must	Recording
		be formatted before starting to record.
		Most new discs are sold unformatted.
	■	Do not use DVD-R authoring discs with
		this unit.
	■	To access on-screen controls during
		recording, press the œ or √ buttons.
	■	When copying from a camcorder and the
		end of the tape is reached (no Video), the
		screen may turn blue or purple.

English - 53