connecting & setting up

CONNECTING THE HDD & DVD RECORDER

This section involves various methods of connecting the HDD & DVD Recorder to other external components and required initial setting modes.

You can connect your HDD & DVD Recorder to the television using the SCART cable if the appropriate input is available on the television.

1.Connect the RF cable as shown.

2.Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD Recorder.

3.Plug the other end into the appropriate connector on the television.

4.Plug in the HDD & DVD Recorder and TV

5.Turn on the HDD & DVD Recorder and TV.

6.Press the INPUT SEL. button on your TV remote control until the Video signal from the HDD & DVD Recorder appears on the TV screen.

To RF IN

To TV

RF Cable

To ANT INPUT

MThe RF cable connection of this product sends only TV signals. You must connect a SCART cable or Audio/Video cables to watch output from your HDD & DVD Recorder.

22_ connecting & setting up

Page 22
Image 22
Samsung DVD-SH873M/XEU manual Connecting & setting up, Connecting the HDD & DVD Recorder