recording

To stop recording

Press the STOP () button to stop or fi nish a recording in progress.

When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.

MYou can not change the recording mode while recording.

Recording will stop automatically if there is no free space left for recording.

Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc.

Up to 999 titles can be registered on the HDD.

HDD recording is available for up to 24 hours, and when recording for 24 hours, 3 titles will be recorded with each being 8 hours in length.

Recording will stop automatically if a copy protected image is selected.

DVD-RAM/±RW discs must be formatted before starting to record. Most new discs are sold unformatted.

Do not use DVD-R authoring discs with this unit.

COPYING FROM A CAMCORDER

SXCVKL

You may control the Camcorder using the IEEE1394 (DV) interface.

1.Connect the DV output jack of your camcorder to the DV input jack on the front of your HDD & DVD Recorder using a DV cable.

2.Press the HDD or DVD button.

If you select DVD, press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.

3.Press the REC MODE button repeatedly to select the recording speed(quality).
4.Press the INPUT SEL. button to select DV.

If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.

5.Select the Play (►) icon on the upper part of the screen to playback the camcorder and fi nd the starting position to copy.

6.To start recording, use the ◄ ► buttons to select Record () icon in the top side of the screen, then press the OK button.

You can press the REC button on the remote control to start recording.

Record Mode

SP(35:12)

 

 

DV

The DV device is connected.

< MOVE

rRETURN

To stop recording

Press the STOP () button to stop or fi nish a recording in progress.

When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.

MTo display playback related icons on the screen, press any direction button on the remote control.

74_ recording