Samsung DVD-SH873M/XEU manual Hdmi Resolution, Output selection, Setting mode, Output jack

system setup

In Component mode, you can set video output to Progressive or Interlace, see page 45.

When the HDMI cable (not supplied) is not connected, available video output jacks are as follow.

Available Video Output Jack

Setting mode	Component mode	RGB MODE
Output jack
Component Output (Y, PB, PR)	O	X
R, G, B	X	O
AV1 Scart	O	X
Composite
Composite Video out	O	O

M When the HDMI cable(not supplied) is connected, RGB output does not operate. Video output is set to Component.

HDMI Resolution

This setting is used when the unit is connected by HDMI with Display devices (TV, projector, etc).

•576P : 720 x 576

•720P : 1280 x 720

•1080i : 1920 x 1080

•1080P : 1920 x 1080

HDD & DVD RECORDER				Video
HDD
Library	TV Aspect		: 16:9 Wide	►
Guide	3D Noise Reduction		: Off	►
Channel	Video Output		: Component	►
	HDMI Resolution		576p:576p	✔►
Timer Record
	Component output		720p:Interlace	►
Disc Manager			1080i
Setup			1080p
m MOVE	sSELECT	rRETURN		eEXIT

Output selection

•Connect the HDD & DVD Recorder to your TV via HDMI. Set your TV’s input to HDMI.

M Progressive scan automatically activates when HDMI is connected.

Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

If Video Output is set incorrectly, the screen may be blocked.

The resolutions available for HDMI output depend on the connected TV or projector. For details, see the user’s manual of your TV or projector.

When the resolution is changed it may take a few seconds for a normal image to appear.

44_ system setup