Samsung DVD-V9700 Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

ENG-20
C ONNECTIONS
Connecting to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a Coaxial cable or an Optical cable (not
included), connect the DIGITALAUDIO OUT
(COAXIAL) or DIGITALAUDIO OUT (OPTICAL)
jack on the rear of the DVD-VCR to the DIGITAL
AUDIO IN (COAXIAL) or DIGITALAUDIO IN
(OPTICAL) jack of the Amplifier.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the
Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
-Please set the audio in the menu screen according to the Amplifier.(See pages 52 to 53)
- The jack position may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO or COMPONENT OUT jacks on the rear
of the DVD-VCR to the VIDEO or COMPONENT
IN jack of your TV as described on pages 14 to
18.
Dolby digital or
DTS Amp.
Coaxial Cable
(not included)
Optical Cable
(not included)
01304D_V9700_XAA_Eng1 2/22/07 8:10 AM Page 20