EFJohnson 002-9800-401 specification

GENERAL OPERATION

bottom line. For example, a “SECURITY” system and “CAR 220” group are displayed as follows. The system and group numbers are not displayed in this mode.

System Alpha Tag

Group Alpha Tag

Alpha Tag Display Mode

Selecting the System and Group

The front panel Select switch is used to change the system and group. Pressing this switch toggles between the system and group select modes, and then rotating it increases or decreases the system or group.

In the Numeric display mode (see preceding description), the system select mode is indicated when the arrow points to “Sxx”, and the group select mode is indicated when it points to “Gxx” (see following diagram).

System Select		Group Select
Mode		Mode

Select Mode Indication With Numeric Display

In the Alpha Tag display mode, the system select mode is indicated by an underline in the left-most character position of the system alpha tag. Likewise, the group select mode is indicated by an underline in the left-most position of the group alpha tag (see following diagram).

17

Image 17

EFJohnson 002-9800-401 Alpha Tag Display Mode Selecting the System and Group, Select Mode Indication With Numeric Display

Contents

Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Multi-Net Features General FeaturesLTR Features Conventional Features Front Panel Controls Controls and Display Controls and Display Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Information Numeric Display ModeBacklight Operation Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and Group Setting Squelch Control Select Mode Indication With Alpha Tag Display Introduction Standard CallsPlacing a Standard Call Multi-Net and LTR Operation Receiving a Standard Call Conventional Operation Placing Telephone Calls Telephone Calls Other Special Calls Busy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone Call Receiving Other Multi-Net Special Calls Bank Select General FeaturesLandside-Originate Calls Emergency Switch Call Indicator Encryption Encryption Indicator Horn Alert Function FCN SwitchHome System/Group Select Option Select Proceed Clear-To-Talk Tone Power Turn-Off Delay Time-Out Timer Stealth Mode Option Switches Option Switches and Menu ModeTone Select Transmitter Thermal Foldback Using Menu Mode Menu Mode Introduction Switch Menu Mode and Option Switch Functions System and Group Scan System and Group Scan Scan List Programming Single and Multiple Site Scan Scan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional Modes Conventional Operation Monitoring Conventional Channels Before Transmitting Busy Queuing Multi-Net MULTI-NET FeaturesStandard and Special Calls Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status Message Calls on Priority and Block ID Codes Caller Identification Transmit Inhibit Busy Queuing LTR LTR FeaturesStandard and Telephone Calls Transpond System Search Priority and Block ID Codes Conventional FeaturesMonitor Mode Receive-Only Groups Transmit Disable On Busy Call Guard Squelch Talk-Around Priority Group Sampling Supervisory Tones Miscellaneous Miscellaneous LTR Telephone Call Tones Multi-Net Telephone Call Tones Display Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode Messages Operation At Extended Range System Operator ProgrammingSpeaking Into Microphone Licensing Preventing Battery DischargeTransceiver Service Miscellaneous