Manuals / EFJohnson / Home Audio / Satellite Radio

EFJohnson 002-9800-401 manual Rear Panel Jacks and Connectors

Models: 002-9800-401

1 63

Download 63 pages 12.61 Kb

Page 13

CONTROLS AND DISPLAY

Speaker - The internal speaker is located behind the grille. An optional speaker can be connected to the external speaker jack located on the back (see “Speaker Jack” description which follows).

Antenna	Power	Speaker
Jack	Jack	Jack

Rear Panel Jacks and Connectors

Antenna Jack - Miniature UHF jack for connecting the 50-ohm antenna.

Power Jack - Connection point for the power cable which attaches to the vehicle battery. A nominal 12-volt DC, negative ground power source is required.

Speaker Jack - Connection point for an optional external 4.7-ohm, 5-watt speaker. The internal speaker is automatically disabled when a speaker is plugged into this jack.

Accessory Cable (Not Shown) - This optional cable is used to connect functions such as ignition switch sense and horn alert to the transceiver.

Data Cable (Not Shown) - This optional cable is used to connect data equipment such as modems and data terminals to the transceiver.

13

Image 13

EFJohnson 002-9800-401 manual Rear Panel Jacks and Connectors

Contents

Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Multi-Net Features General FeaturesLTR Features Conventional Features Front Panel Controls Controls and Display Controls and Display Rear Panel Jacks and Connectors Display Description Determining Volume Level Power-Up SequenceGeneral Operation Backlight Operation Numeric Display ModeSystem/Group Display Information Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and Group Setting Squelch Control Select Mode Indication With Alpha Tag Display Introduction Standard CallsPlacing a Standard Call Multi-Net and LTR Operation Receiving a Standard Call Conventional Operation Placing Telephone Calls Telephone Calls Other Special Calls Busy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone Call Receiving Other Multi-Net Special Calls Landside-Originate Calls General FeaturesBank Select Emergency Switch Call Indicator Encryption Encryption Indicator Home System/Group Select Function FCN SwitchHorn Alert Option Select Proceed Clear-To-Talk Tone Power Turn-Off Delay Time-Out Timer Stealth Mode Option Switches Option Switches and Menu ModeTone Select Transmitter Thermal Foldback Using Menu Mode Menu Mode Introduction Switch Menu Mode and Option Switch Functions System and Group Scan System and Group Scan Scan List Programming Single and Multiple Site Scan Scan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional Modes Conventional Operation Monitoring Conventional Channels Before Transmitting Standard and Special Calls MULTI-NET FeaturesBusy Queuing Multi-Net Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status Message Calls on Priority and Block ID Codes Caller Identification Transmit Inhibit Standard and Telephone Calls LTR FeaturesBusy Queuing LTR Transpond System Search Monitor Mode Conventional FeaturesPriority and Block ID Codes Receive-Only Groups Transmit Disable On Busy Call Guard Squelch Talk-Around Priority Group Sampling Supervisory Tones Miscellaneous Miscellaneous LTR Telephone Call Tones Multi-Net Telephone Call Tones Display Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode Messages Speaking Into Microphone System Operator ProgrammingOperation At Extended Range Transceiver Service Preventing Battery DischargeLicensing Miscellaneous