EFJohnson 002-9800-401 manual Option Select

Models: 002-9800-401

1 63
Download 63 pages 12.61 Kb
Page 29
Image 29

GENERAL FEATURES

When enabled, the horn alert pulses on and off for 1-8 cycles and then goes back to the disabled state. To change the currently selected horn alert mode, the HORN option switch or HRN ALRT menu parameter can be used if available (see page 32).

The horn alert is programmed to operate in the manual or automatic mode (see descriptions which follow). If the ignition switch does not control transceiver power, only the front panel power switch affects oper- ation when applicable. Refer to “Power Turn-Off Delay” on page 30 for more information.

Manual Off/On Mode

The horn alert mode does not change when power is turned on and off by either the ignition switch or power switch. Therefore, the horn alert is entirely controlled by either the HORN option switch or menu parameter.

Auto Off/On Mode

Ignition Switch - The horn alert always turns off when the ignition switch is turned on, and always turns on when the ignition switch is turned off (if there is a turn-off delay).

Power Switch - The horn alert always reverts to the off condition when power is turned on by the power switch.

NOTE: The preceding automatic operation overrides any mode that may have been selected by the HORN option switch or HRN ALRT menu parameter.

Option Select

The AUX switch or OPTION menu parameter can be used to control an accessory that may have been installed by your system operator. If the switch is used, the enabled condition is indicated by in the display.

29

Page 29
Image 29
EFJohnson 002-9800-401 manual Option Select