EFJohnson 002-9800-401 manual LTR Features, Standard and Telephone Calls, Busy Queuing LTR

Models: 002-9800-401

1 63
Download 63 pages 12.61 Kb
Page 48
Image 48

LTR FEATURES

LTR FEATURES

Standard and Telephone Calls

Standard calls are between two mobiles or between a mobile and a control station. Telephone calls allow you to place and receive calls over the public telephone system using your transceiver. Standard calls are described starting on page 19, and telephone calls are described starting on page 21.

Busy Queuing (LTR)

The LTR busy queuing feature places a telephone call in a queue if the radio system is busy when it is placed. Then when the system becomes available, the call is automatically placed. Standard (mobile-to- mobile) calls are not queued by this feature. If queuing is programmed and a busy condition is encountered, the queue mode is entered automati- cally when the PTT switch is released. The queue mode is indicated by “IN QUEUE” on the bottom line of the display as shown below.

When the radio system becomes available, it is automatically accessed. A beep then sounds and a dial tone is heard. The call can then be placed if desired. The queue mode is exited before the call is placed if any of the following occur (exit is indicated when “IN QUEUE” is no longer displayed).

The PTT switch is pressed

Any call is received

Any front panel option switch is pressed

Power is turned off

Calls are received normally in the queue mode. However, receiving any call causes the mode to be exited as indicated above. Group scanning

48

Page 48
Image 48
EFJohnson 002-9800-401 manual LTR Features, Standard and Telephone Calls, Busy Queuing LTR