EFJohnson 002-9800-401 manual Receiving a Telephone Call, Placing Other Multi-Net Special Calls

TELEPHONE CALLS AND OTHER SPECIAL CALLS

Receiving a Telephone Call

1.Turn transceiver power on and set the volume as described starting on page 15.

2.Select or scan the system and group programmed for telephone calls.

When a telephone or Multi-Net special call group is selected, is displayed.

3.When “ringing” is heard, press the PTT switch and respond. The PTT switch must be pressed to talk and released to listen the same as with standard calls.

4.When the call is finished, it should be terminated as in step 7 of the preceding section.

Placing Other Multi-Net Special Calls

Multi-Net special calls include the telephone calls just described and also Unique ID and Directed Group calls. Unique ID calls are to specific mobiles, and Directed Group calls are to specific groups. These calls can be placed to other users assigned to your site or some other site that is part of the same network.

As with telephone calls, a microphone with a telephone keypad is required to dial the number specifying the mobile being called. The numbers dialed are 4-8 digits long, and they will be provided by your system operator. The procedure used to place these calls is as follows:

1.Select the system and group programmed for Unique ID and Directed Group calls. When one of these groups or a telephone group is selected, is displayed.The group alpha tag displayed on the lower line may also indicate when one of these groups is selected.

2.Briefly press the PTT switch to obtain a dial tone. The procedure is similar to that used with telephone calls, and the Busy Queuing and Roaming features are available if programmed. Refer to step 4 near the bottom of page 19 for more information.

23