MULTI-NET Features, Busy Queuing Multi-Net | EFJohnson 002-9800-401

MULTI-NET FEATURES

Monitor Mode

Selected

MULTI-NET FEATURES

Standard and Special Calls

Standard calls are between two mobiles or between a mobile and a control station, and special calls include telephone, unique ID, and directed group. Standard calls are described starting on page 19, tele- phone calls starting on page 21, and unique ID and directed group calls starting on page 23.

Busy Queuing (Multi-Net)

The Multi-Net Busy Queuing feature places the call in a queue if a busy condition occurs when the PTT switch is pressed. Then when the radio system is no longer busy, a tone sounds and the call can be placed if desired. This feature is enabled on individual Multi-Net systems by dealer programming, and it is then available with all types of calls on that system. This feature operates as follows:

If a busy condition exists, the busy tone sounds and the Busy Queuing mode is entered automatically when the PTT switch is released. The busy tone then stops sounding and “IN QUEUE” is displayed as shown in the following illustration. When the transceiver successfully accesses the system, either a beep or dial tone sounds. The beep sounds

43

Image 43

EFJohnson 002-9800-401 manual MULTI-NET Features, Standard and Special Calls, Busy Queuing Multi-Net

Contents

Operating Manual Safety Information Page FCC Limits for Maximum Permissible Exposure MPE FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Table of Contents Quick Reference Guide Conventional Features General FeaturesMulti-Net Features LTR Features Front Panel Controls Controls and Display Controls and Display Rear Panel Jacks and Connectors Display Description Determining Volume Level Power-Up SequenceGeneral Operation Backlight Operation Numeric Display ModeSystem/Group Display Information Select Mode Indication With Numeric Display Alpha Tag Display Mode Selecting the System and Group Setting Squelch Control Select Mode Indication With Alpha Tag Display Multi-Net and LTR Operation Standard CallsIntroduction Placing a Standard Call Receiving a Standard Call Conventional Operation Placing Telephone Calls Telephone Calls Other Special Calls Busy and Out-Of-Range Conditions Placing Other Multi-Net Special Calls Receiving a Telephone Call Receiving Other Multi-Net Special Calls Landside-Originate Calls General FeaturesBank Select Emergency Switch Call Indicator Encryption Encryption Indicator Home System/Group Select Function FCN SwitchHorn Alert Option Select Proceed Clear-To-Talk Tone Power Turn-Off Delay Time-Out Timer Stealth Mode Transmitter Thermal Foldback Option Switches and Menu ModeOption Switches Tone Select Using Menu Mode Menu Mode Introduction Switch Menu Mode and Option Switch Functions System and Group Scan System and Group Scan Scan List Programming Single and Multiple Site Scan Scan Delay and Continue Timers Transmitting In The Scan Mode General MULTI-NET, LTR, Conventional Modes Conventional Operation Monitoring Conventional Channels Before Transmitting Standard and Special Calls MULTI-NET FeaturesBusy Queuing Multi-Net Roaming Auto-Registration Transmitting Status Messages Status Select Mode Selected Status Message Calls on Priority and Block ID Codes Caller Identification Transmit Inhibit Standard and Telephone Calls LTR FeaturesBusy Queuing LTR Transpond System Search Monitor Mode Conventional FeaturesPriority and Block ID Codes Receive-Only Groups Transmit Disable On Busy Call Guard Squelch Talk-Around Priority Group Sampling Supervisory Tones Miscellaneous Miscellaneous LTR Telephone Call Tones Multi-Net Telephone Call Tones Display Messages Miscellaneous Miscellaneous Bright DIM OFF Menu Mode Messages Speaking Into Microphone System Operator ProgrammingOperation At Extended Range Transceiver Service Preventing Battery DischargeLicensing Miscellaneous