EFJohnson 002-9800-401 manual Controls and Display

CONTROLS AND DISPLAY

Option Switches - The five front panel option switches can be programmed by your system operator to the functions listed below. Refer to the section indicated for more information on a function. The keycap usually indicates the function controlled by the switch.

A/D - Scan list add/delete (see page 37)

CG - Call Guard squelch disable (see page 52) EMER - Emergency switch (see page 26) ENCPT - Encryption on-off (see page 27)

FCN - Function select (see following description) HORN - Horn alert on-off (see page 28)

MON - Monitor mode on-off (see page 42) AUX - Option select (see page 29)

PRI - Priority sampling on-off (see page 53) SCAN - Scan on-off (see page 35)

STLH (AUX) - Stealth mode select (see page 31) TA - Talk-around on-off (see page 52)

(Blank) - Not used (disabled)

FCN (Function) Switch - This switch (if programmed) selects the following functions:

Menu Mode Select - Press FCN twice (see page 32)

Home Sys/Grp Select - FCN/press Select switch (see page 28) Conv Squelch Set - FCN/rotate Select switch (see page 18)

Transmit/Busy Indicator - Indicates the following conditions: Red - Transmitter keyed, normal power output

Orange - Transmitter keyed, power reduced because internal temperature is high

Green - Busy conventional group (channel). Refer to “Conventional Operation” on page 41 for more information.

Microphone Jack - Connection point for the microphone.

Microphone Push-To-Talk (PTT) Switch (Not Shown) - Push-button on the microphone which is pressed to key the transmitter.

12