MISCELLANEOUS
55
seconds before this tone sounds, a single beep sounds to indicate that
time-out will soon occur.
•Transmit I nhibit - If this tone sounds as soon as the PTT switch is
pressed with a Multi-Net or LTR system selected and “TX INH IB” is
displayed, the transmitter has been disabled by the Transmit Inhibit
feature (see page47).
•Transmit Disable On Busy - If this tone sounds as soon as the push-to-
talk switch is pressed with a conventional system selected and “DSBL
BSY” is displayed, the channel is busy a nd the transmitter was disabled
by the Transmit Disable On Busy feature (see page51).
•Receive-Only Channel - If this tone sounds as soon as the push-to-talk
switch is pressed with a conventional system selected and “TX DSBL”
is displayed, the channel is receive-only (see page51).
•Tx While Receiving Call - If the push-to-talk switch is pressed while
receiving a Multi-Net or LTR call, this tone sounds and “DSBL BSY”
is displayed.
Proceed (Clear-To-Talk) Tone - This is a short tone which sounds after
the push-to-talk switch is pressed to indicate when talking can begin (see
page 30). A loud (two-pitch) tone may also be programmed.
Key Press Tone - This is a short tone that indicates when an option
switch is pressed (all modes).
Priority Call Tone - This is a short tone that sounds when a call is received
on a conventional first or second priority channel (see page53).
Wrap-Around Tone - This is a two-pitch tone that indicates that the
highest or lowest channel was displayed and that wrap-around has
occurred.
Error Tone - This is a two-pitch tone that indicates that an error condition
has occurred.