Connector Locations and Assignments | Sun Microsystems CP3000

A.1 Connector Locations and Assignments

This module is AMC.1 and AMC.3 compliant and can use ports 2 and 3, as defined in the AMC.3 specification.

Callout Port Function

12 AMC.3 Serial Storage Port 2

23 AMC.3 Serial Storage Port 3

34 AMC.1 PCI Express lane 0

45 AMC.1 PCI Express lane 1

56 AMC.1 PCI Express lane 2

67 AMC.1 PCI Express lane 3

A.2 Connector Pinouts

The AMC.1-HDD SAS disk includes an AMC connector, which conforms to the single-slot B+ extended connector, with 170 signal contacts.

The AMC.1-HDD SAS disk communicates with the carrier board through the AMC connectors. Connector usage for the AMC.1-HDD SAS disk is listed in the following table.

TABLE A-1Pin Assignments

Pin#	Signal Name	Pin#	Signal Name	Pin#	Signal Name	Pin#	Signal Name
1	GND	46	GND	91	No Connect	136	No Connect
2	12V	47	'PORT4_PCIe_RX0_P'	92	GND	137	GND
3	'PRSNT1_L'	48	'PORT4_PCIe_RX0_N'	93	No Connect	138	No Connect
4	'AMC_VCC3'	49	GND	94	No Connect	139	No Connect
5	GA0	50	'PCIe_TX1_P'	95	GND	140	GND
6	No Connect	51	'PCIe_TX1_N'	96	No Connect	141	No Connect
7	GND	52	GND	97	No Connect	142	No Connect
8	No Connect	53	'PCIe_RX1_P'	98	GND	143	GND

A-2Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010

Image 54

Sun Microsystems CP3000 manual Connector Locations and Assignments, Connector Pinouts, Table A-1Pin Assignments

Contents

For the AMC.1-HDD SAS Disk Please Recycle Contents Overview Managing the AMC Environment Specifications Configuring the AMCConnectors and Ports Agency Certifications Index Index-1 Preface Typographic Conventions Related Documentation Third-Party Web Sites Sun Welcomes Your Comments Page Important Safety Information for Sun Hardware Systems Getting Started Chassis Compatibility System RequirementsOperating Systems Compatibility Blade Server Compatibility Unpacking Electrical and Environmental Handling AMCs AMC Faceplate 1AMC.1-HDD SAS Disk Faceplate AMC LEDs 1AMC Status LEDs 2Hot-Swap Blue LED States Removing and Installing AMCs Removing an AMCShut down the payload OS Hot-Swap LED starts blinking 2Deactivating the AMC Remove the AMC 3Removing the AMC Removing a Blade Server and AMC 4Front Cable Management Bracket in Lower Position Installing an AMC Remove the filler panel, if necessary Obtain the AMC card from the ship kit 5Sample Top View 6Opening the Injector/Ejector Latch Page Push the ejector latch in fully 7Inserting the AMC Into a Blade Server Power on the system, if necessary To Enable AMC Port 2 Driven by Port 1 of SAS ControllerTo Enable AMC Port 3 Driven by Port 2 of SAS Controller Enabling and Disabling SAS Ports To Disable AMC Port 2 Driven by Port 1 of SAS Controller To Disable AMC Port 3 Driven by Port 2 of SAS ControllerPage Overview Features Power Regulator Key ComponentsHard Drive Disk SAS Controller FlashModule Management Controller MMC Port Connectors Faceplate and LEDsLEDs OOS Functional Diagram Technical Support and WarrantyPage 4Sun Netra CP3000 AMC.1-HDD SAS disk Barcode Labeling Disposal Managing the AMC Supported Ipmi Commands Monitoring and Control FunctionsIpmi Controller 1Supported Ipmi Commands FRU Information 2Standard FRU Data Records Sensors 3Threshold Sensors Firmware and Software Upgrades Readme files within the download package Configuring the AMC Configuration Tools Boot Bios Utility Features and Configurations Launching the Boot Bios UtilityPress Ctrl C Page OpenBoot Bios 2Adapter Properties Menu Extensible Firmware Interface EFI Enabling and Disabling Channel Ports Connectors and Ports Connector Locations and Assignments Connector PinoutsTable A-1Pin Assignments Appendix a Connectors and Ports SAS Controller Ports Keying Ports 1AMC e-Keying Port AssignmentsPage Environment Specifications Electrical and Environmental Table B-1Electrical SpecificationsTable B-2Environmental Specifications Electrical Table B-3MTBF Values by Temperature RPM Reliability Absolute Maximum RatingsNormal Operating Ranges Board Dimensions and Weight AMC.1-HDD SAS disk PCB DimensionsMechanical Page Agency Certifications CE Certification NEBS/ETSI Safety Emissions Test Regulations 1 EN 55022 Emissions2 EN 55024 Immunity Regulatory Information FCC USAIndustry Canada Canada Page Index Numerics NEBS/ETSI, C-2